Home › Concrete Repair and Resurfacing
Our concrete repair services in Raleigh, NC restore damaged driveways, patios, and sidewalks so they are safer and look better. We address cracks, spalling, and uneven slabs with proven repair methods. Resurfacing options can refresh tired concrete without the cost of full replacement when conditions allow.
Superior Concrete Raleigh provides professional concrete repair throughout Raleigh, NC, North Carolina and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (984) 342-0629 or request your free quote.
Concrete repair in Raleigh that fixes the cause, not just the crack
In Raleigh, our clay-heavy soil and hot summers are rough on concrete. Driveways settle near the street, patios crack where water runs off roofs, and garage floors start to flake from winter salts. Superior Concrete Raleigh focuses on concrete repair and resurfacing that fixes these problems at the source so they do not keep coming back.
When you call us, we start with a close inspection, not just a quick look from the truck. We check where water is draining, how the slab is sloping, what kind of cracks you have, and whether the base under your concrete has washed out. Hairline surface cracks, hollow sounding spots, spiderweb cracks by the garage, and edge breakage all point to different repair methods. We explain what we see in plain language so you know exactly what is happening and what your options are.
Most Raleigh homeowners who contact us about concrete repair are dealing with one of a few issues: trip hazards at control joints on the driveway, spalling and pitting on the front walk, or old, stained pool decks that are structurally sound but ugly. Our goal is to tell you honestly whether you need full replacement or if a well planned repair or resurfacing can save you money and extend the life of what you already have.
How our concrete repair process works, step by step
A proper concrete repair in our climate always starts with cleaning and preparation. We pressure wash to remove sand, pollen, and mildew, then use degreasers on oil or transmission stains so new materials can bond correctly. On flaking or delaminated areas, we mechanically grind or chip away weak concrete until we reach solid material.
Crack repair depends on the width and depth of the damage. For small shrinkage cracks we use flexible crack fillers that move with temperature changes. For structural cracks, we widen and undercut the crack with a grinder, vacuum the dust, then fill with a high strength polymer modified repair mortar or epoxy. On some garage and warehouse floors we stitch wider cracks with metal ties across the crack before filling, which dramatically reduces the chance of the crack reopening.
When there is settlement or hollow voids under the slab, we often recommend slab lifting instead of tearing everything out. We drill small holes in the slab, then pump a cementitious grout under the concrete to fill voids and raise low sections. This helps remove trip hazards on sidewalks and driveway panels near the street apron. After lifting we patch the injection holes with matching repair materials so the finished surface looks clean and intentional.
Edge repairs and broken corners are rebuilt differently from flat cracks. We square up the damaged area, install bonding agents, then form and rebuild the edge with a rapid setting repair mix that can be shaped and finished to match your existing slab. This is common at driveway edges where vehicles repeatedly drop off the side of the concrete.
Concrete resurfacing to renew tired driveways, patios, and pool decks
If your concrete is structurally sound but looks worn, stained, or patchy from old repairs, resurfacing is usually more cost effective than replacement. Superior Concrete Raleigh installs thin overlay systems that bond to your existing slab and create a fresh, uniform wearing surface.
A typical resurfacing project starts by grinding or shot blasting to create a rough, clean surface. We repair major cracks and low spots first so they do not print through the overlay. Then we apply a primer or bonding agent and spread a polymer modified cement overlay that is engineered to stick tight to the old concrete. This material can be broom finished to look like new concrete, trowel finished for a smooth garage floor, or textured for slip resistance on pool decks and entries.
For Raleigh pool decks and patios, heat and bare feet are a big factor. We often recommend lighter colored, textured overlays that stay cooler than plain gray concrete and provide better traction when wet. Decorative options are available too, such as knockdown finishes, scored patterns, or stained overlays to mimic stone without the maintenance of real flagstone. We can integrate expansion joints and control joints into the resurfacing so the new surface moves with the old slab instead of randomly cracking.
Because overlays are thinner than new concrete, surface preparation is critical. We spend extra time removing loose material, curing compounds, and sealers to avoid delamination months later. Our crews test small areas as we go to confirm that the overlay is bonding the way it should before we apply the full coat.
What affects the cost of concrete repair or resurfacing in Raleigh
Customers often expect a simple price per square foot, but real concrete repair is more like surgery than painting. Several local factors in Raleigh influence cost.
The first driver is the type and severity of damage. Filling hairline cracks and applying a simple overlay on a patio is usually on the lower end. Stabilizing a settled driveway panel near a storm drain, stitching structural cracks, and lifting sunken sections with grout injection will cost more because the materials and time involved increase.
Access and layout matter as well. A straight, open driveway near the street is easier for our crew and equipment than a small backyard patio behind a fence or down a slope. Tight spaces may require smaller machines, more handwork, and longer hose runs for lifting or resurfacing materials, which adds labor.
Existing coatings, paint, or thick sealers must often be removed before we can repair or resurface. In older Raleigh neighborhoods we frequently see multiple layers of paint on porches and carports. Stripping or grinding these coatings is dusty, time consuming work that has to be figured into the estimate.
Finally, finish choices affect material cost. A basic broom finish resurfacing usually costs less than a decorative overlay with custom color, stain, or saw cut designs. During your estimate, Superior Concrete Raleigh lays out at least two or three options, with clear explanations of what changes the price so you can choose based on budget and how long you plan to stay in the home.
Local concrete issues we see every week in Raleigh
Raleigh has a mix of older concrete from the 1970s and 1980s plus newer slabs from recent housing growth. That mix creates some predictable problems we know how to handle.
In older neighborhoods inside the Beltline, we see many front walks and steps that have settled toward the street, often due to older clay sewer lines or tree roots disturbing the base. In these cases, we check for root pressure and drainage problems before lifting or resurfacing so the repair does not fight against ongoing movement. Sometimes we recommend root pruning or minor drainage changes along with concrete work.
In North Raleigh and Cary, driveways built on fill dirt or near retaining walls often develop long, running cracks or sink at the garage apron. We typically combine base stabilization, slab lifting, and reinforcement of the cracked areas, then follow with a resurfacing layer if the appearance is uneven.
Throughout Wake County, freeze and thaw cycles are milder than up north but still enough to damage unsealed, low strength concrete. We often see scaling and surface flaking on driveway aprons near the street where winter deicing salts from the road collect. Our approach is to remove the weak surface, apply a dense repair or overlay system, then seal it so the top layer is far more resistant to moisture and salt.
Because pollen, humidity, and shade can cause slippery mildew on concrete, especially on north facing walks and steps, many homeowners ask us to add texture during resurfacing. We use broom, knockdown, or light exposed finishes that improve traction without being rough on bare feet.
What to expect when you hire Superior Concrete Raleigh
Superior Concrete Raleigh is a local company, so you deal with a Raleigh based estimator and crew from start to finish. During your site visit, we walk through the areas you are worried about, listen to how you use the space, and explain whether repair, resurfacing, or replacement makes the most sense. We do not push the most expensive option, we focus on what will hold up based on how your concrete is actually being used.
Once you approve the plan, we schedule work around weather and your schedule. Concrete repair and resurfacing are sensitive to temperature and rain. In our hot summers we often start early to avoid finishing during peak heat, which helps prevent premature drying and surface defects. If rain threatens, we may reschedule rather than rush the job, and we explain that upfront so there are no surprises.
During the project, we protect nearby landscaping and siding as we grind, drill, or pressure wash. We keep you updated on any hidden issues we uncover, such as deeper voids under a slab or unexpected coating layers. After repairs or overlays are installed, we apply the appropriate curing and sealing methods and give you written guidance on cure times, when you can walk or drive on the surface, and how to maintain the new finish so it lasts.
If you are in Raleigh or a nearby town and have concrete that is cracked, uneven, or simply worn out, Superior Concrete Raleigh can help you decide whether repair or resurfacing is the right move. We aim for work that looks good, feels safe, and is done in a way that fits our local soil, weather, and everyday use.
